Write a Review

For a stable, worry-free ride with any rear wheel-mounted trainer. Product Features - For a stable, worry-free ride with any rear wheel-mounted trainer. - Unique 3-level design lets you select the level of difficulty. - Stack two blocks to simulate climbing workouts. Three different positions to raise your front wheel and simulate hill climbs - 2.1 inches (5.3 cm) - 2.7 inches (6.8 cm) - 3.1 inches (7.9 cm)

Our Hike Full Cushion Crew socks, formerly PhD Outdoor, use cushioning on the entire sock to help maximize warmth and protection. These responsibly sourced, ZQ-certified Merino wool hike socks are built with our top sock tech, including Indestructawool technology for enhanced durability, our 4 Degree Elite Fit System for a dialed-in, performance-oriented fit, and our Virtually Seamless toe for maximum in-shoe/boot comfort. We've updated our hike line by improving mesh zones for additional breathability, as well as creating a new ply structure that reduces pilling while enhancing hand-feel and comfort. Not to mention, our best-feeling, best-fitting hiking socks are now made with recycled nylon—making these socks more sustainable than ever. Now that's something you can feel good in and about. Features: - Sock Height: Crew - Sock Cushion: Full Cushion - 4 Degree elite fit system for a dialed-in, performance-oriented fit - Additional body-mapped mesh zones for added breathability - Virtually Seamless toe for enhanced comfort - Indestructawool technology with extended durability zones - Comfort welt with 'stay put' fit - Height 8" - Made in USA of Imported Yarn: 56% Merino Wool, 11% Nylon, 31% Recycled Nylon, 2% Elastane

The DND (Down And Dirty) is all about the essentials—fit, durability, and control. It’s built to be affordable and long-wearing, with a supple feel thanks to the Super Fit engineered AX Suede palm that eliminates excess material and bunching. The upper breathes well and offers four-way stretch for maximum comfort day in and day out. These features and simple construction make the DND the favorite among dirt jumpers and trail riders alike.

Our Classic Hike Extra Cushion Crew sock features a dense cushion for adventurers who need more padding in their favorite hiking shoe or boot. This "go far. feel good." originator is getting an eco-friendly makeover thanks to recycled nylon and responsibly sourced Merino wool, but still offers the unmatched comfort it did in 1994. Elevate every hike with this cozy, capable classic. Features: - Sock Height: Crew - Sock Cushion: Extra Cushion - Flat knit toe seam for additional comfort - Our first sock construction, only now featuring recycled nylon (content varies by style) - Elasticized arch brace for secure fit - Knit in USA of Imported Yarn: 56% Merino Wool, 11% Nylon, 31% Recycled Nylon, 2% Elastane

Our Classic Hike Full Cushion Crew socks focus on comfort and durability, so you can go farther on every hike. Responsibly sourced, ZQ-certified Merino wool keeps things soft, while recycled nylon keeps it all sustainable. And full cushioning on the entire sock adds the warmth and protection you need and love. Stay cozy out there with our updated Classic Hike socks. Features: - Sock Height: Crew - Our first sock construction, only now featuring recycled nylon (content varies by style) - Flat knit toe seam for additional comfort - Elasticized arch brace for secure fit - Knit in USA of Imported Yarn: 56% Merino Wool, 11% Nylon, 31% Recycled Nylon, 2% Elastane - Sock Cushion: Full Cushion

Our Classic Hike Full Cushion Crew socks focus on comfort and durability, so you can go farther on every hike. Responsibly sourced, ZQ-certified Merino wool keeps things soft, while recycled nylon keeps it all sustainable. And full cushioning on the entire sock adds the warmth and protection you need for any trail. Stay comfortable out there with our updated women's Classic Hike socks. Features: - Sock Height: Crew - Sock Cushion: Full Cushion - Our first sock construction, only now featuring recycled nylon (content varies by style) - Elasticized arch brace for secure fit - Flat knit toe seam for additional comfort - Made in the USA of Imported Yarn: 56% Merino Wool, 11% Nylon, 31% Recycled Nylon, 2% Elastane

- Material: water-resistant nylon - Mount: saddle/seatpost - Pockets: 1 internal - Closure: zip

This basket is as sweet as honey. It's perfect for holding all your smaller things. Easily hook this basket to your handlebars. Toss in your keys, sunglasses, tacos, whatever. You have things. We have things to hold those things. - Attaches to the handlebar with metal hooks - Proprietary Electra design - Honeycomb patterned stamp - Powder-coated steel - Carries up to 2.5kg (5lb) - Dimensions: 22cm (l) x 18cm (w) x 14cm (h) - Attachment: Quick Release - Includes hardware: Yes - Material: Steel

No matter what kind of fuel you sip to help you power your pedals, Electra's Linear Cup Holder will bring it along for the ride. It features a solid handlebar mount that's a breeze to install and classy, laser-etched anodized aluminum construction that firmly holds your beverage so you can use both hands to steer.

Nothing captures a driver's attention like the flickering motion of reflectives around the rider's feet. Based on our popular Elite Sock, this eye-catching version features BioViz® reflective stripes at the cuff to improve rider visibility in low light conditions. Wear the Flash Reflective Sock on your daily commute or on any ride that will start early or finish late.

Born out of necessity during wet and muddy Midwest gravel races, our Gravel Gaiter keeps mud, sand and gravel out of your shoes. We took inspiration from the scree gaiters used by trail runners to develop a cycling-specific version that provides maximum breathability and durability so you can ride through the worst conditions. A locking zipper keeps the Gravel Gaiter securely in place and the Hypalon midfoot strap won't get in the way during treacherous hike-a-bike sections.

These lightweight, breathable minimalist gloves were designed for epic pursuits. With 3-D vented mesh uppers and our signature single-layer Ax Suede RPET palm, the Epik Gloves act as a second skin on the hottest summer shred days. Features: - Pre-curved design with 3D mesh fingertips for maximum dexterity - Single-panel GRS-certified AX Suede RPET palm offers high abrasion resistance, dexterity and durability. Made from recycled plastic bottles using a water-based manufacturing process that eliminates the use of toxic solvents. - Silicone braking fingers for improved modulation - 3-D vented mesh upper fabric for maximum breathability - Microfiber thumb panel - Touch-screen compatible - Holes for ventilation on palm - Pull-on cuffless, no-slip design - Sublimated graphics

Your feet will be happier in SockGuy cycling socks. They're made of a supportive, comfortable, and fast-drying Micro Denier nylon/spandex fabric and boast double-stitched toes and heels for excellent durability. Plus, for a perfect fit on any foot, they feature SockGuy's Stretch-to-Fit sizing and Easy-Fit cuffs.

Mount a rack to any bike with this lightweight adapter that adds two M5 rear threaded eyelets to the seatpost. CONSTRUCTION • Aluminum

Completely renewed, sporting a dynamic tread pattern design. Matches with a race bike, as well as a classic city road bike. Available in a wide range of dimensions and colors. PureGrip Compound Based on activated silica compounds, this technology was originally intended as an performance level compound, but after intensive development at our Korbach Research and Development Department Facility, an advanced new compound with outstanding grip and cross-country properties was developed. This new rubber mix, given the self explanatory name "PureGrip", is ranked just behind our BlackChili Compound and is being used in our performance products both in the road and mountain bike sectors. Whilst providing great grip, it is also long lasting and highly durable – both characteristics of Continental tires, which are exclusively manufactured in the factory in Hefei (Asia). Suitable for E-Bikes For our E-Bike tyre we fall back on over 100 years' experience with moped and motorcycle tires. All of our city/trekking tires are rated to a standard speed of at least 25 km/h. Those tires marked e50 are also certified for S-Pedelecs. With their high quality structure, puncture protection is high and the rolling resistance is low offering protection from premature wear brought about by the additional driving force.

The RideCase for iPhone has a scratch-resistant, dual-density, non-slip, high-grade engineering polymer/rubber exoskeleton for shock and impact protection that securely holds your phone while on the go. Its unique and full-angle adjustable mount allows viewing in landscape or portrait orientation and lets you mount or remove the RideCase in seconds. An integrated flip stand allows for easy viewing off your bike and is compatible with wireless charging. - Material: Engineering grade polymer / Rubber / Machined aluminum - Includes mounts for installation on handlebar, stem, or stem cap

Topeak's RideCase and mount lets you use your iPhone 6 or 6 Plus as a cycling computer, as a GPS navigating device, to listen to music, and so much more while you're cruising the open road. The RideCase has a separate protective composite fiber panel which integrates with the high-grade engineering plastic exoskeleton to securely hold your iPhone while on the go. An integrated flipstand allows comfortable viewing in landscape or portrait orientation when you're off the bike. Its unique and full angle adjustable mount allows viewing in landscape or portrait orientation and lets you mount or remove the RideCase in seconds.

Works with iPhone 6/6s/7/8. Clip in your iPhone to use as a cycling computer with apps, including the Topeak Panobike app, use it to navigate as a GPS device, listen to music, and much more while riding. The RideCase has a separate protective composite fiber panel which integrates with the high-grade engineering plastic exoskeleton to securely hold your iPhone while on the go. Its unique and full angle adjustable mount allows viewing in landscape or portrait orientation and lets you mount or remove the RideCase in seconds. - Material: Engineering grade plastic frame with composite fiber base plate / Machined aluminum - Added Features: Integrated flipstand for landscape or portrait viewing/Angle adjustable rotates for landscape or portrait viewing/Included mounts compatible with Topeak PanoComputer - Mount: Included mounts for installation on handlebar, stem or stem cap - Size: 14.1 x 7 x 1.6 cm / 5.6” x 2.8” x 0.6” - Weight: 27 grams